Welcome to Foshan jingling Glass Machinery Co., Ltd. official website!

Automatic glass cutting machine

Contact

Foshan jingling Glass Machinery Co., Ltd.

After service telephone: 400-670-8660

Mobile phone: 13925913620

Tel: 0757-85507185

Mailbox: 837466960@qq.com

Website: 新葡京电玩城,葡京电玩城,澳门葡京电玩城 www.cuoylc.com

Address: Guangdong Foshan City, Nanshan District, Songgang Town West lion Village Industrial Zone


Crystal glass mechanical sharing glass cutting machine maintenance and maintenance knowledge

Your current location: Home >> News >> Company news

Crystal glass mechanical sharing glass cutting machine maintenance and maintenance knowledge

Release date:2018-09-17 Author:晶菱玻璃机械 Click:

  

With the continuous development of science and technology, glass cutting technology and equipment have great potential and broad market prospects. Therefore, it is a very popular equipment. Here are the main points of maintenance and maintenance of glass cutting machine.


First, the machine must confirm that the laser tube is full of circulating water before working.

    The glass cutter automatically flows into the water tank, opens the water tank, takes out the water pump, and clears the dirt on the pump. Clean the water tank, replace the circulating water, return the pump to the water tank, insert the water pipe connecting the pump into the intake, and tidy up the joints. Operate the pump separately and run for 2-3 minutes (the laser tube is full of circulating water).


Two. Fan cleaning:

    The long-term use of the fan will accumulate a lot of solid dust in the fan, which makes the fan produce a lot of noise, and is not conducive to exhaust and deodorization. When the fan suction is insufficient and smoke exhaust is not smooth, first turn off the power supply, unload the inlet and outlet ducts of the fan, remove the dust inside, then turn the fan upside down, and pull the blades inside, until clean, and then install the fan.

晶菱玻璃机械

 

Three. Cleaning of lenses (it is recommended that the equipment should be shut down before working every day). Laser glass cutting machine, with a rotating wipe from the center to the edge of the lenses. The lens No. 3 and the focusing lens need to be removed from the frame and wiped in the same way. After wiping, they can be put back as they are.


Note: 1. the lens should be gently polished, not to damage the surface coating (metal wood coated lenses are more durable).

2. wipe the process should be gently put to prevent falling.

3. when installing the focusing lens, be sure to keep the concave side down.


Four.Cleaning of guideway (recommended cleaning frequency cycle: half a month, shutdown operation). As one of the core components of equipment, guideway and linear axis play a guiding and supporting role. In order to maintain the high processing accuracy of the machine, it is required that the guide rail and straight line have high guiding accuracy and good processing quality of the glass cutting machine. The daily maintenance of the guide rail and straight line axis should be done carefully.



share
Welcome to our message
Please enter the message content, we will contact you as soon as possible。
Full name
Full name
Telephone
Telephone
mailbox
mailbox
address
address