Glass needs to be manufactured separately according to the actual installation size, so each piece of glass needs to be cut separately. In order to improve the production efficiency of hollow glass and ensure the cutting quality of special shape (non-rectangular) glass, automatic special-shaped glass cutting machine was developed.
The automatic profiled glass cutting machine is suitable for various curved arc cutting process requirements. Angle positioning, tool linear velocity positioning and cutting path motion control are accomplished by using three-axis linkage mechanism. The three-axis machine of this system is different from the ordinary three-axis machine. Z, X and Y form a three-dimensional space, while Z axis of glass cutting machine is a rotating axis, which mainly ensures that the direction of the cutting tool's travel angle is consistent with the direction of the combined movement of X and Y axis, so as to effectively ensure the cutting efficiency and quality as well as the cutting quality. Extend the service life of cutting props. At the same time, the three axle load of glass cutting machine is also different from the general system. In this project, the requirement of three-axis linkage is relatively high, and the precision of motion control is relatively high. At the same time, it is hoped that the machine can analyze the design drawings and work independently to achieve the full automation standard.
Automatic glass cutting machine has high accuracy, low manual speed and low accuracy. Semi automatic is much slower than automatic. What about the cutting speed of the automatic glass cutter? The cutting speed of the automatic glass cutter must be very fast, but it's hard to say how many cuts can be made in an hour. Because the size of the glass, how many cuts are needed, these parameters will affect the data. A 3660*2440 piece of glass, if it needs to be cut into four pieces, will take about 4 hours. 0 seconds. If your doors and windows are relatively fixed in size, it will be very fast to use a fully automatic tablet machine to match with a semi-automatic cutting machine.